Classic-Castle.com


The source for all your LEGO Castle needs!

is lego using lower quality plastic?

Open message to The LEGO Company. We make no guarantee that anyone from LEGO will actually read them, let alone respond!

Re: is lego using lower quality plastic?

Postby davee123 » Sun Feb 19, 2012 4:42 pm

For the record regarding head-holes:

Back between 1975 to 1991, they had solid stud head holes. Then, LEGO became concerned that minifig heads might be a choking hazard. So they added small holes to the heads so that if a minifig head got lodged in a child's throat, they could still breathe (if it weren't lodged sideways). So from 1992-2010, minifig heads all had little holes inside the head.

However, LEGO recently decided that it's getting a lot of competition, and has been on a branding kick. That means they're re-evaluating all their elements that DON'T have the LEGO logo on them and attempting to stick it in there. In particular, they wanted to put the LEGO logo on the minifig head. So they re-evaluated the choking hazard on a minifig head, and determined that it wasn't as big of a hazard as they previously thought, and that it would be OK if they did away with the holes, and put the LEGO logo at the bottom of the recessed stud.

Hence, starting in 2011 (not everything, but some things), you'll see some minifig heads that have a hollow stud without holes at the bottom.

DaveE
davee123
Knower of the Doin's
Knower of the Doin's
 
Posts: 468
Joined: Fri Jun 18, 2004 9:07 pm
Location: Massachusetts, USA

Re: Is lego using lower quality plastic?

Postby Knight Man » Sun Feb 26, 2012 12:57 am

Romans 8:37~ Yet in all these things we are more than conquerors through Him who loved us.
Joshua 24:15~ ...But as for me and my house, we will serve the Lord.
Image My Flickr My sets
User avatar
Knight Man
Journeyman
 
Posts: 438
Joined: Sun Jan 01, 2012 6:00 am
Location: Upper-Midwest, USA

Re: is lego using lower quality plastic?

Postby Ferretclaw » Fri Jul 05, 2013 11:20 pm

So far I have been very fortunate as far as cracked bricks/slopes. I have never had a cracked building piece. However, I have noticed that my torsos tend to crack a lot under the arm hole when I am taking out or putting in an arm for a custom figure. This bothers me, as i already have more legs then torsos. But anyway, this has happenedto me about 3 times, twice with new figs, once with a (really) old fig. Oh well. It still holds the arm, just its loose. :cry: :wink:
"All that is gold does not glitter..." ~LOTR
My Flickr: http://www.flickr.com/photos/98506221@N08/
Mocpages: http://mocpages.com/home.php/103548
Image
User avatar
Ferretclaw
Artisan
 
Posts: 255
Joined: Wed Jul 03, 2013 7:46 pm

Previous

Return to Dear LEGO

Who is online

Users browsing this forum: No registered users and 1 guest

cron