Classic-Castle.com


The source for all your LEGO Castle needs!

Norman Kite Shield Decals

Discussion of custom parts made for the Castle Theme

Norman Kite Shield Decals

Postby Pallando the Blue » Thu Mar 10, 2011 12:28 am

Recently I decided to push my army back into the 11th and 12th century, which has meant losing some pieces (visor helms, heater shields, etc).

Image
Two Normans with a Saxon soldier behind them.

I've been looking at the Bayeux Tapestry and other Hastings-era artifacts and I saw I'll need a lot more kite shields for my Norman-esque army (and I'll do Viking targes for the Saxons, but that's another topic) and I really liked the varieties of pre-heraldic shield designs. I decided I wanted to give decals a try (especially since I have an extraordinary amount of islanders shields) and as long as I'm making a few on an 8.5 x 11 page, I might as well fill it, right?
Image


As you'll notice, not all of these are my design (Anthony Sava's Classic Castle templates helped me a lot) but I'd like to get a little feedback on their designs and also maybe some help with the printing of decals. I don't frequent hobby stores much, but is it likely I'll be able to buy single sheets of waterslide decal paper? Also, will Kinko's let me use their laser printers for waterslide decals?

One final thought: these don't have any metallic colors, but if anyone has one of those fancy dry ink printers, I feel some people would pay for the service of having you print our decals out for us :)
<><
User avatar
Pallando the Blue
Peasant
 
Posts: 71
Joined: Wed Aug 08, 2007 10:32 pm
Location: Sisters, OR

Re: Norman Kite Shield Decals

Postby Frank_Lloyd_Knight » Thu Mar 10, 2011 4:53 pm

These look pretty nifty. When I last undertook a shield decal project, I could only find paper in 8.5x5.5, which Kinkos could not print on. I only considered Kinkos, though, because I thought my own printer wouldn't print to a high enough quality, but then I discovered how to adjust the print settings for photographic images and the the decals came out just fine. I'm unfamiliar with dry-ink printing. However, to get a metallic look on some shield bosses, I applied a shading effect in the software I used (Excel), which in my opinion, came out well. A lot of people also recommend using Brasso to remove printing on pieces. I found that Comet worked well at removing the paint, but it does leave some very slight scratches in the surface of the piece -- which didn't really matter to me since I was covering them with decals anyway. I'll be eager to see what your finished product looks like. Good luck.

FLK
Frank_Lloyd_Knight
Journeyman
 
Posts: 425
Joined: Sat Mar 06, 2010 4:53 am
Location: Corpus Christi

Re: Norman Kite Shield Decals

Postby quaraga » Sun Mar 13, 2011 8:27 pm

I like the basic designs, they look like they would make for a colourful army.
adverblessly,
-T.R.
He who thinks you should look at the box that says "Quaraga" if you want to find out his username (about as useful to you as his real name). he only wants you to look so he can laugh about you looking there because he's a total smart...
User avatar
quaraga
Total n00b
Total n00b
 
Posts: 232
Joined: Mon Dec 28, 2009 4:10 am
Location: roflysst (rolling on the floor laughing, yet still somehow typing)

Re: Norman Kite Shield Decals

Postby H3LLB0Y3 » Fri Mar 25, 2011 7:38 am

Woah what a variety! Nice work! If and when these are available for purchase let me know, Id love to get my hands on some.
You wonder why I'm not afraid?
There is no weapon
There is no blade
You'll never kill Him that lives inside of me.
User avatar
H3LLB0Y3
Freeman
 
Posts: 99
Joined: Sat Mar 27, 2010 5:04 pm


Return to Castle Customs

Who is online

Users browsing this forum: No registered users and 3 guests