Little Armory.
Re: Little Armory.
same here I order everything medieval 10 x, paid already cant wait to recieve them!
[url=http://www.brickmania.com/community/]Top Poster on Brickmania[/url]
[url=http://www.bricklink.com/feedback.asp?u=Kevin1990]Proud Briclinker[/url]
[url=http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Kevin1990]Brickshelf[/url]
[url=http://www.bricklink.com/feedback.asp?u=Kevin1990]Proud Briclinker[/url]
[url=http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Kevin1990]Brickshelf[/url]
Re: Little Armory.
Just ordered one of each medieval weapons pack, so now if they do go out of business, I still managed to get some
[url=http://www.flickr.com/photos/harryrussell/]flickr[/url]
- Barbrickian
- Freeman
- Posts: 82
- Joined: Wed Jul 22, 2009 10:58 pm
Re: Little Armory.
Just got my medieval weapons pack 1 and thought I would share some observations. The pike is ridiculously long, but pike did range up to 20 ft. long, so that's fine. They threw in a couple Great Helms, and I would warn you all only to use these with plain lego heads, or other heads you can sacrifice, since once the helm is on you probably won't be able to get it off again. I mistakenly put one on a bearded head and mangled the neck pretty badly with jeweler's needle nose pliers getting the head back out of the helm. Boooooooo. As for the weapons, they all look great, but many of them fit very loosely in a minifig hand or other lego clip (saddles, plates w/ bricks, etc.). The viking looking axe and the smaller sword are the two that fit the tightest. The two handed sword, the pike, the dagger, the flanged mace, and the scimitar are all a very loose fit. They also threw in a couple medieval weapons pack 2 and they seem to have a better fit in general. All of the weapons in both sets come still attached to their inject molding frames. They all snap of with relative ease with the exception of the long sword in weapons pack 2, which has a very small and fragile cross guard. The tip of the cross guard is one of two points where the sword is attached, and it's very difficult to break that connection without damaging the cross guard.
All in all I would have been much happier with all of the products if a) they had better fit, and b) they were dark grey instead of black as I think they would blend better with the Lego brand weapons if they were. As they are I'm glad I bought them, but wouldn't purchase any more unless those issues were fixed and they were available in dark grey.
All in all I would have been much happier with all of the products if a) they had better fit, and b) they were dark grey instead of black as I think they would blend better with the Lego brand weapons if they were. As they are I'm glad I bought them, but wouldn't purchase any more unless those issues were fixed and they were available in dark grey.
- CastleLord
- Reeve
- Posts: 492
- Joined: Fri Aug 08, 2008 12:06 pm
- Location: Sitting in CC chat and speaking with someone...
- Contact:
Re: Little Armory.
I have the same problem with BrickForges Great helms and my tip is to put the head into a lego goblet and pull it works for me.Barbrickian wrote:and I would warn you all only to use these with plain lego heads, or other heads you can sacrifice, since once the helm is on you probably won't be able to get it off again. I mistakenly put one on a bearded head and mangled the neck pretty badly with jeweler's needle nose pliers getting the head back out of the helm.
CastleLord.
CastleLord. The Lord of the castle.
TFOL and computer nerd. I do as I please and live life to the fullest!
Please visit:
and [url=http://www.flickr.com/photos/castlelord/]My Flickr[/url]
TFOL and computer nerd. I do as I please and live life to the fullest!
Please visit:
and [url=http://www.flickr.com/photos/castlelord/]My Flickr[/url]
- Barbrickian
- Freeman
- Posts: 82
- Joined: Wed Jul 22, 2009 10:58 pm
Re: Little Armory.
Thanks for the tip. I've got their great helms as well, and they're not near as tight as the Little Armory helm.CastleLord wrote:I have the same problem with BrickForges Great helms and my tip is to put the head into a lego goblet and pull it works for me.Barbrickian wrote:and I would warn you all only to use these with plain lego heads, or other heads you can sacrifice, since once the helm is on you probably won't be able to get it off again. I mistakenly put one on a bearded head and mangled the neck pretty badly with jeweler's needle nose pliers getting the head back out of the helm.
CastleLord.
- Heir of Black Falcon
- Justiciar
- Posts: 1966
- Joined: Fri Jan 25, 2008 3:37 pm
- Location: Utah (I'm baaaack)
Re: Little Armory.
That is very odd. I have some as well and they are not near so tight that I had to use any tool to get them out. It is somewhat tight but I just have to twist it slightly and it comes off fine. I wonder if you could add a slight amount of oil to the very top to counter this issue?
I really like my LA stuff and would buy more if I could. Their 14th century armour kit is great for outfitting a knight.
Heir
I really like my LA stuff and would buy more if I could. Their 14th century armour kit is great for outfitting a knight.
Heir
There ain't nothin' girlie about a tunic...
- JoshWedin
- Chevalier de Chèvre
- Posts: 4995
- Joined: Sun Nov 09, 2003 2:35 pm
- Location: Pondering what you are pondering
- Contact:
Re: Little Armory.
My main beef with LA weapons is that they are attached to a sprue. I ruined the cross-guard on one of my long swords when I cut it off. Rather annoying. I have a set of the armor as well, but I've never used it. I keep forgetting to buy glue. Since I've been forgetting to buy it for over a year now, probably never going to happen.
Josh
Josh
AFOL and his money are easily parted.
[url=http://www.flickr.com/photos/ak_brickster/8 ... hotostream][img]http://farm9.staticflickr.com/8252/85336074 ... 2a10_t.jpg[/img][/url] [url=http://www.Brothers-Brick.com]The Brothers Brick[/url]
[url=http://www.flickr.com/photos/ak_brickster/8 ... hotostream][img]http://farm9.staticflickr.com/8252/85336074 ... 2a10_t.jpg[/img][/url] [url=http://www.Brothers-Brick.com]The Brothers Brick[/url]
Re: Little Armory.
I too have done this on mine.JoshWedin wrote:My main beef with LA weapons is that they are attached to a sprue. I ruined the cross-guard on one of my long swords when I cut it off. Rather annoying.
[url=http://www.flickr.com/photos/harryrussell/]flickr[/url]
- Heir of Black Falcon
- Justiciar
- Posts: 1966
- Joined: Fri Jan 25, 2008 3:37 pm
- Location: Utah (I'm baaaack)
Re: Little Armory.
Never had problems with that myself. How did you go about cutting them off? I find a nice razor blade is good. If you are really into it you can further clean it up with some super fine sandpaper. I never did model making or Warhammer etc. but have a friend who does and he seems to be able to get the connection points to be invisible. Maybe some of the pros or semi-pros can help out with their experience?
Heir
Heir
There ain't nothin' girlie about a tunic...
Re: Little Armory.
same problem here leaves very ugly marks :/ But I recieved themKarrde wrote:I too have done this on mine.JoshWedin wrote:My main beef with LA weapons is that they are attached to a sprue. I ruined the cross-guard on one of my long swords when I cut it off. Rather annoying.
[url=http://www.brickmania.com/community/]Top Poster on Brickmania[/url]
[url=http://www.bricklink.com/feedback.asp?u=Kevin1990]Proud Briclinker[/url]
[url=http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Kevin1990]Brickshelf[/url]
[url=http://www.bricklink.com/feedback.asp?u=Kevin1990]Proud Briclinker[/url]
[url=http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Kevin1990]Brickshelf[/url]
- Old_School_Fan
- Laborer
- Posts: 116
- Joined: Thu Aug 31, 2006 2:11 am
- Location: Nebraska
Re: Little Armory.
Heir of Black Falcon wrote:Never had problems with that myself. How did you go about cutting them off? I find a nice razor blade is good. If you are really into it you can further clean it up with some super fine sandpaper. I never did model making or Warhammer etc. but have a friend who does and he seems to be able to get the connection points to be invisible. Maybe some of the pros or semi-pros can help out with their experience?
Heir
It def. helps to have some model tools handy with LA's weapons. I use a pair of cutters specifically designed to cut objects out of a sprue, and it works very well!
[url=http://www.flickr.com/photos/7893418@N03/]My Flickr[/url]