I've had a pile of used Lego that I didn't really want to use since the bricks were scratched and yellowed. One of my many hobbies is detailing my car, so I decided to put some of those tools to use. I documented my progress to see if I could really make these bricks look better.
This first picture shows the stuff I used:
Meguiar's M205 Ultra Finishing Polish - Available online, or you can get Scratch X 2.0 at any Walmart, Target, etc.
Microfiber pad - You can also use an old towel or t-shirt
I washed these bricks individually using a toothbrush and dishwash soap when I got them, but as you can see, it wasn't enough to get some of the dirt, yellow tint, and scratches out. This is what they looked like after stacking them:
Here's a close up of the bricks showing the damage:
I put a pea sized amount of the polish on the pad and polished the brick wall using a lot of elbow grease. I rubbed the polish in for a few minutes until my arm got tired and this was the result:
Here's a close up:
It looks a little cleaner, but I think I can make it look better. Time for the big guns.
I used a regular household drill and the foam pad attachment that came with the 3M Headlight Restoration Kit:
I set the brick wall on the ground, put a pea sized amount of polish on the pad and got to work. It's best to have somebody help you hold the wall down with two hands while you use both hands to hold the drill steady. I went across the wall 3-4 times. Afterwards, I washed the bricks with dishwashing liquid to get rid of the polishing oils and this was the result:
And here's a close up:
Is it perfect? No. 100 times better? Absolutely!
I was totally happy with the results and it didn't take much time to do. Next time though, I think I will skip the polishing by hand and just use the drilll. I'm sure you could get the same results if you stick to it, but you will have to put a lot of elbow grease into it and spend more time.
Just in case...
DISCLAIMER: I take no responsibility for the damage to your bricks, any property damage, bodily harm, or any other adverse effects that may arise directly or indirectly from this guide. Do so at entirely your own risk. This document is provided for information/education purposes only!
Polishing Lego Bricks
- Bluesecrets
- High Priestess of the Vermillion Order
- Posts: 2185
- Joined: Sat Sep 04, 2004 6:21 pm
- Location: On the girls side of the castle.
- Contact:
Re: Polishing Lego Bricks
Wow those bricks look very shiny now. This brings up a question, now are you getting glare issues when you take your pictures?
Thank you for sharing. Maybe one day I shall attempt it also.
Thank you for sharing. Maybe one day I shall attempt it also.
- Shadowviking
- Councilor
- Posts: 1066
- Joined: Thu Mar 08, 2007 7:04 pm
- Location: Holland MI
- Contact:
Re: Polishing Lego Bricks
Shiny!
Nice find.
Nice find.
...and that's how Equestria was made!
[url=http://www.flickr.com/people/shadowviking/]flickr[/url] | [url=http://receptacle.tumblr.com/]tumblr[/url] | [url=http://tellers-tales.wikidot.com/]teller's tales[/url]
[url=http://www.flickr.com/people/shadowviking/]flickr[/url] | [url=http://receptacle.tumblr.com/]tumblr[/url] | [url=http://tellers-tales.wikidot.com/]teller's tales[/url]
Re: Polishing Lego Bricks
Looks great. How did the polishing work on the yellowed pieces? Are they any whiter?
Another question: If you combine these restored pieces with unrestored/regular pieces, and build a wall, is there any differences in thickness or texture (that is noticeable) between the two types?
My husband uses special plastic polishes in his radio restorations, and I've always wanted to try it on white bricks.
Another question: If you combine these restored pieces with unrestored/regular pieces, and build a wall, is there any differences in thickness or texture (that is noticeable) between the two types?
My husband uses special plastic polishes in his radio restorations, and I've always wanted to try it on white bricks.
Karen
Left dark ages Jan '07
Left dark ages Jan '07
Re: Polishing Lego Bricks
Here's a 50/50 shot of similar looking pieces.KarenJ wrote:Looks great. How did the polishing work on the yellowed pieces? Are they any whiter?
Another question: If you combine these restored pieces with unrestored/regular pieces, and build a wall, is there any differences in thickness or texture (that is noticeable) between the two types?
My husband uses special plastic polishes in his radio restorations, and I've always wanted to try it on white bricks.
Before
After
From the picture, it looks like the 2 severely yellowed pieces are similar in shade, but in the after photo, it looks a tad bit lighter in shade. It could just be because it was scratched and dirty though. It's hard to tell the extent of the damage in these small pics (400 pixel limit). If you click here to the flickr album, you can see the difference in the full size pics. They are the last two photos in the set.
http://www.flickr.com/photos/29290522@N ... 144935055/
There's really no difference in thickness that I can tell. As far as texture, it just feels smoother since the scratches are gone. They feel similar to any shiny new brick from a new set after the polish.