Dying bricks with Vinyl Dye - the result
- SavaTheAggie
- Lord Sava of Aggie
- Posts: 2419
- Joined: Tue Sep 09, 2003 6:36 am
- Location: Houston
- Contact:
Dying bricks with Vinyl Dye - the result
On Sunday I went out and bought a can of Vinyl and Plastic 'Coating'. It was the only product for Vinyl both Wal Mart and Autozone carries. I also bought a KK2 set with the red knight to experiment. The product I bought was:
Dupli-Color Vinyl & Fabric Coating (coating in really tiny letters... a clue!)
And here is our poor test subject:
Now I followed the directions I had read online about dying computer cover parts, spraying about 12 inches away in a sweeping motion. I took five minute breaks, allowing the 'coating' to dry.
Well, what I got resembles stone. Not bad, but definately not what I was going for.
So I went to a different website, one with close up pictures, and it definately looked nothing like what I had, and everything I was trying to achieve. I obviously had not bought genuine Vinyl Dye.
So once again I went out, this time to O'Reilly's auto parts. Hidden on a shelf, not with the paints, was a product called:
Mar-Hyde Vinyl Color Spray
This stuff looked like the real deal. The first named ingrediant? Acetone! That's right, everyone's favorite plastic-melting compound.
From what I read, this is exactly what I wanted.
So I bit the bullet, and subjected my favorite KK2 knight, the purple one, to the knife, so to speak.
Once again, I followed the same procedure - long distance sweeping motions, taking breaks between. This new stuff said it dries in 15 minutes, and can be subjected to weather in 2 hours. The other can didn't even mention a time frame.
So the result? I know you're tired of my write up.
Here are the two visors. Remember, the red knight's visor (right) got the Vinyl "Coating", while the purple knight's visor (left) got the Vinyl Dye.
Without Flash:
With Flash:
Modeling the product:
The purple knight's visor's color most closely resembles new dark bley, from what I can tell. Not too bad, I must say. Its' very smooth, it hardly looks like it got a color treatment at all. I didn't even have to pre-coat it in white.
I know that O'Reilly's sells black, off-white, tan, dark blue, and this 'silver smoke'. There are many websites that offer a much broader color range, but their cans were $17 each. The Stone-like 'coating' cost me $3.50, the Vinyl Dye cost me $4.50.
--Anthony
Dupli-Color Vinyl & Fabric Coating (coating in really tiny letters... a clue!)
And here is our poor test subject:
Now I followed the directions I had read online about dying computer cover parts, spraying about 12 inches away in a sweeping motion. I took five minute breaks, allowing the 'coating' to dry.
Well, what I got resembles stone. Not bad, but definately not what I was going for.
So I went to a different website, one with close up pictures, and it definately looked nothing like what I had, and everything I was trying to achieve. I obviously had not bought genuine Vinyl Dye.
So once again I went out, this time to O'Reilly's auto parts. Hidden on a shelf, not with the paints, was a product called:
Mar-Hyde Vinyl Color Spray
This stuff looked like the real deal. The first named ingrediant? Acetone! That's right, everyone's favorite plastic-melting compound.
From what I read, this is exactly what I wanted.
So I bit the bullet, and subjected my favorite KK2 knight, the purple one, to the knife, so to speak.
Once again, I followed the same procedure - long distance sweeping motions, taking breaks between. This new stuff said it dries in 15 minutes, and can be subjected to weather in 2 hours. The other can didn't even mention a time frame.
So the result? I know you're tired of my write up.
Here are the two visors. Remember, the red knight's visor (right) got the Vinyl "Coating", while the purple knight's visor (left) got the Vinyl Dye.
Without Flash:
With Flash:
Modeling the product:
The purple knight's visor's color most closely resembles new dark bley, from what I can tell. Not too bad, I must say. Its' very smooth, it hardly looks like it got a color treatment at all. I didn't even have to pre-coat it in white.
I know that O'Reilly's sells black, off-white, tan, dark blue, and this 'silver smoke'. There are many websites that offer a much broader color range, but their cans were $17 each. The Stone-like 'coating' cost me $3.50, the Vinyl Dye cost me $4.50.
--Anthony
[url=http://www.ikros.net][img]http://www.ikros.net/links/ikrosbuttonsmall.jpg[/img][/url]
Give a man a fire and he'll be warm for a day.
Set a man on fire and he'll be warm for the rest of his life.
Give a man a fire and he'll be warm for a day.
Set a man on fire and he'll be warm for the rest of his life.
- JoshWedin
- Chevalier de Chèvre
- Posts: 4995
- Joined: Sun Nov 09, 2003 2:35 pm
- Location: Pondering what you are pondering
- Contact:
That is an interesting product. The second one definitely looks better on the visor, but think the first one could have some interesting applications too.
Thanks!
Josh
Thanks!
Josh
AFOL and his money are easily parted.
[url=http://www.flickr.com/photos/ak_brickster/8 ... hotostream][img]http://farm9.staticflickr.com/8252/85336074 ... 2a10_t.jpg[/img][/url] [url=http://www.Brothers-Brick.com]The Brothers Brick[/url]
[url=http://www.flickr.com/photos/ak_brickster/8 ... hotostream][img]http://farm9.staticflickr.com/8252/85336074 ... 2a10_t.jpg[/img][/url] [url=http://www.Brothers-Brick.com]The Brothers Brick[/url]
- kingkastle
- Laborer
- Posts: 139
- Joined: Mon Dec 06, 2004 2:42 am
- Location: Newmarket, Ontario
- Contact:
OHHHHHHHHHHHHHHHHHHH. they both look very nice indeed. Purple knight definitely looks better for use as an actual knight. Red knight definitely looks useable as a statue. Will have to find me some of this stuff. One question though. Did you spray inside the helmet as well? Just interested as to if or if not the plastic becomes any larger with this coating of vinyl paint? I know you stated that vinyl paint absorbs into the plastic. But if one were to use it on, say, a minifig head and helmet would they still fit together??
well I would at least like to think that I'm evil...
Wow... this worked really well on both counts! The purple knight looks very official, as others have said - but I actually prefer the first knight... he seems like the perfect horde knight, or some sort of barbarian.
This was a very nice experiment - I'm tempted to get some of the other colors now that I've seen what you've managed to pull off.
This was a very nice experiment - I'm tempted to get some of the other colors now that I've seen what you've managed to pull off.
Knight Templar
n. pl. Knights Templars or Knights Templar
1.A member of an order of knights founded about 1118 to protect pilgrims in the Holy Land during the Second Crusade.
[url=http://legelot.50webs.com/mainPages/myStory.html]My Lego Stories: The Land of Legelot![/url]
[url=http://z13.invisionfree.com/Castle_World]CW-THE Lego Story Writer's Guild[/url]
n. pl. Knights Templars or Knights Templar
1.A member of an order of knights founded about 1118 to protect pilgrims in the Holy Land during the Second Crusade.
[url=http://legelot.50webs.com/mainPages/myStory.html]My Lego Stories: The Land of Legelot![/url]
[url=http://z13.invisionfree.com/Castle_World]CW-THE Lego Story Writer's Guild[/url]
- Tanotrooper
- Gentleman
- Posts: 737
- Joined: Fri Aug 12, 2005 1:36 pm
- Location: Flanders, Belgium
cool
my brickshelf gallery:
[url]http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Tanotrooper[/url]
Please take a look at my TTfigs:
[url]http://www.classic-castle.com/forum/viewtop ... 7&start=15[/url]
[url]http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Tanotrooper[/url]
Please take a look at my TTfigs:
[url]http://www.classic-castle.com/forum/viewtop ... 7&start=15[/url]
- MaxiVisVires
- Squire
- Posts: 618
- Joined: Tue Sep 14, 2004 8:32 pm
- Location: San Diego, CA If I was any closer to LEGOLand, I'd be living there
- Contact:
Now does the color of the plastic had anything to do with how the treatment of the dyes turned out? Did the texture of the plastic change?
Overall a very nice looking effect.
Overall a very nice looking effect.
"The Wise Warrior, When he moves, Is never confused; When he acts, Is never at a loss."
[url=http://www.bricklink.com/store.asp?p=kaylinda]Vis Vires Toys[/url] | [url=http://www.brickshelf.com/cgi-bin/gallery.c ... xivisvires]My Brickshelf[/url]
[url=http://www.bricklink.com/store.asp?p=kaylinda]Vis Vires Toys[/url] | [url=http://www.brickshelf.com/cgi-bin/gallery.c ... xivisvires]My Brickshelf[/url]
Too bad there's no O'Reilly car part store near me. Both of them look really good in my opinion, with the second one looking smoother, and the first one looking like he has a textured stone effect. Great experiment Anthony
HenrytheV
HenrytheV
[url=http://www.bricklink.com/store.asp?p=HenrytheV]My Bricklink Store[/url]
- SavaTheAggie
- Lord Sava of Aggie
- Posts: 2419
- Joined: Tue Sep 09, 2003 6:36 am
- Location: Houston
- Contact:
Nope, the plastic is just as it was before.lil Jon wrote:Did anything happen to the plastic, like it getting soft and weak, or brittle?
Not for long. I first need to build a rig (probably just a vertical toothpick or bent paperclips) to hold the visor off the ground slightly, just so it doesn't sit in the excess dye (the dye dries like paint if it is not absorbed into a porous material).Suvied wrote:Is it still purple on the inside?
I don't see why not. I did not observe any sort of build-up or any related growth in dimensions on the purple visor. The red visor, on the other hand, does have a noticeable layer.kingkastle wrote:One question though. Did you spray inside the helmet as well? Just interested as to if or if not the plastic becomes any larger with this coating of vinyl paint? I know you stated that vinyl paint absorbs into the plastic. But if one were to use it on, say, a minifig head and helmet would they still fit together??
I thought the color of the plastic mattered at first, because the color on the purple visor is much darker than the color on the can, but looking back at my aluminum foil, the excess dye is the same color. My conclusion is that as far as purple is concerned, the color did not play any role in the final color outcome.MaxiVisVires wrote:Now does the color of the plastic had anything to do with how the treatment of the dyes turned out? Did the texture of the plastic change?
As for texture, the red visor has a very stoney texture, very rough, but that wasn't Vinyl Dye I used. The Purple visor doesn't have any decernable texture, though the gloss has been dulled down.
You should be able to find Vinyl Dye at any larger auto parts store. Heck, even mom and pop auto part stores sell em around here (now that I know). Plasti-Kote is the brand of choice by the feller whom I learned about Vinyl Dye. After looking at their website I know of 6 places locally that sell that brand.HenrytheV wrote:Too bad there's no O'Reilly car part store near me.
--Anthony
[url=http://www.ikros.net][img]http://www.ikros.net/links/ikrosbuttonsmall.jpg[/img][/url]
Give a man a fire and he'll be warm for a day.
Set a man on fire and he'll be warm for the rest of his life.
Give a man a fire and he'll be warm for a day.
Set a man on fire and he'll be warm for the rest of his life.
- SavaTheAggie
- Lord Sava of Aggie
- Posts: 2419
- Joined: Tue Sep 09, 2003 6:36 am
- Location: Houston
- Contact:
Well folks... I don't know what to say.
So I'll just let you make your own conclusions.
--Anthony
EDIT: Lenny pointed out I didn't specifically say what color I used. The name of it is "Silver Smoke" of the Mar-Hyde Vinyl COlor Spray.
If you're REALLY looking into the coating stuff that makes the stone look, it's called "Medium Gray"
So I'll just let you make your own conclusions.
--Anthony
EDIT: Lenny pointed out I didn't specifically say what color I used. The name of it is "Silver Smoke" of the Mar-Hyde Vinyl COlor Spray.
If you're REALLY looking into the coating stuff that makes the stone look, it's called "Medium Gray"
[url=http://www.ikros.net][img]http://www.ikros.net/links/ikrosbuttonsmall.jpg[/img][/url]
Give a man a fire and he'll be warm for a day.
Set a man on fire and he'll be warm for the rest of his life.
Give a man a fire and he'll be warm for a day.
Set a man on fire and he'll be warm for the rest of his life.
- MaxiVisVires
- Squire
- Posts: 618
- Joined: Tue Sep 14, 2004 8:32 pm
- Location: San Diego, CA If I was any closer to LEGOLand, I'd be living there
- Contact:
That looks like Dark Gray to me...SavaTheAggie wrote:Well folks... I don't know what to say.
So I'll just let you make your own conclusions.
--Anthony
EDIT: Lenny pointed out I didn't specifically say what color I used. The name of it is "Silver Smoke" of the Mar-Hyde Vinyl COlor Spray.
If you're REALLY looking into the coating stuff that makes the stone look, it's called "Medium Gray"
"The Wise Warrior, When he moves, Is never confused; When he acts, Is never at a loss."
[url=http://www.bricklink.com/store.asp?p=kaylinda]Vis Vires Toys[/url] | [url=http://www.brickshelf.com/cgi-bin/gallery.c ... xivisvires]My Brickshelf[/url]
[url=http://www.bricklink.com/store.asp?p=kaylinda]Vis Vires Toys[/url] | [url=http://www.brickshelf.com/cgi-bin/gallery.c ... xivisvires]My Brickshelf[/url]
- Tanotrooper
- Gentleman
- Posts: 737
- Joined: Fri Aug 12, 2005 1:36 pm
- Location: Flanders, Belgium
gotta find some of this stuff!
Ave!
Ave!
my brickshelf gallery:
[url]http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Tanotrooper[/url]
Please take a look at my TTfigs:
[url]http://www.classic-castle.com/forum/viewtop ... 7&start=15[/url]
[url]http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Tanotrooper[/url]
Please take a look at my TTfigs:
[url]http://www.classic-castle.com/forum/viewtop ... 7&start=15[/url]
Wow. I have been really out of the loop for a bit.
both visors are interesting (a stone armored group would be wild!) but I am interested in getting some of this vinyl dye. I thought it was just paint.
So does it actually bond with the plastic then? with paint, you can get something to take paint off with (I had some stuff that didnt melt the plastic) and repaint it if you want, but I gather the dye is permanent?
seems a better deal to me...
both visors are interesting (a stone armored group would be wild!) but I am interested in getting some of this vinyl dye. I thought it was just paint.
So does it actually bond with the plastic then? with paint, you can get something to take paint off with (I had some stuff that didnt melt the plastic) and repaint it if you want, but I gather the dye is permanent?
seems a better deal to me...