Classic-Castle.com


The source for all your LEGO Castle needs!

TTfigs: minifigs with moving brickbuilt legs

Discussion of general LEGO topics

TTfigs: minifigs with moving brickbuilt legs

Postby Tanotrooper » Mon Jan 21, 2008 9:05 pm

I think this particular design hasn't been pulled off yet, so I will use this name for these kind of figures:

Image

As I use brickbuilt legs, the problem was they couldn't move. Even the shoes couldn't turn a bit. I now improved this by making the legs move. This type is the adult male first version, and any updates to this design will be other versions.

back shot:

Image

A standard modern lego torso is used, in wich a minifig hand can be inserted in 3 points in the middle of the torso. The legs are held by a "T" bar, and because they go a lot forward, the hand is placed at the back of the torso:

http://www.brickshelf.com/gallery/Tanotrooper/TTfigs/grownupmaleONE/first03.jpg

Image

Image

Make sure the minifig hand is as close to the bar as it can:

Image

Thanks to the minifigs hand design, the hand will force the bar upwards in the front, making it pretty sealed with the torso. The bar can also serve as a belt decoration.

Thanks to this, a minifig can go Kung Fu like:

Image

Image

He can march:

Image

And can walk extreme :P :

Image

The result is a highly flexible minifig, in wich a lot of detail like boots can be put in. The torso can also can also move sideways, and the minifig is able to take lifelike bending forward poses.

Feel free to comment or use the design :D

TT
User avatar
Tanotrooper
Gentleman
 
Posts: 737
Joined: Fri Aug 12, 2005 1:36 pm
Location: Flanders, Belgium

Postby Dr. J » Mon Jan 21, 2008 9:09 pm

Really cool!
Though I don't think I would use it for a normal fig, this would be great for a cyborg with robotic legs!
I might just use this design sometime... Thanks for sharing!
User avatar
Dr. J
Steward
 
Posts: 526
Joined: Mon Mar 19, 2007 1:07 am
Location: USA

Postby Life_Unscripted » Mon Jan 21, 2008 9:45 pm

lol He has a tail :D
User avatar
Life_Unscripted
Laborer
 
Posts: 133
Joined: Mon Jan 14, 2008 8:21 pm
Location: North Georgia

Postby footsteps » Mon Jan 21, 2008 9:53 pm

Life_Unscripted wrote:lol He has a tail :D

Too bad the "tail" can't fit into the torso. That would upgrade this from 'really cool' to 'absolutely excellent'!

Well done, Tanotrooper, on thinking outside the box!

Alan
I'm a human BEING, not a human doing!
The two most important days of your life are the day you are born
and the day you discover why. (Donald Sensing)
One plus one equals three... for large values of one. (Bruce Fournier)
User avatar
footsteps
Tastes good with ketchup
 
Posts: 1680
Joined: Sat Oct 11, 2003 12:03 am
Location: Canada

Postby Tanotrooper » Mon Jan 21, 2008 9:59 pm

I'm thinking of ideas to attach for example gear on the "tail", to give it a pratical use :D

Thanks for the comments :)

TT
User avatar
Tanotrooper
Gentleman
 
Posts: 737
Joined: Fri Aug 12, 2005 1:36 pm
Location: Flanders, Belgium

Postby Remyth » Mon Jan 21, 2008 10:14 pm

Great piece usages, Tano! These look great, though as has been said before, I'm not sure how I like it for everyday figs, but I can think of a ton of great uses for it already.

Very nice work!

In Christ,
Thomas Wunz <><

"A nameless, shapeless beast from the dark underside of Chat." - Josh Wedin

Flickr
User avatar
Remyth
Trade King
 
Posts: 1855
Joined: Sun Apr 02, 2006 3:43 am
Location: At the corner of Nowhere Avenue and Not Close to Anything Street

Postby Donut » Tue Jan 22, 2008 3:48 am

Ingenious! May I ask where can you find the bley rod shaped piece?
LEGO --- Impossible is Nothing.
User avatar
Donut
Councilor
 
Posts: 1007
Joined: Sat Jun 02, 2007 12:00 am
Location: USA

Postby Lamanda2 » Tue Jan 22, 2008 5:06 am

Hmm.. I like it! :)

I'm not really one for brick-built legs on figs, but it would be great for a cyborg/robot figure as Dr. J has suggested.
I think I'll have to 'steal' your design for use in future vigs, it has a lot of potential.

Of course, the customizer in me makes me want to take and cut a lightsaber bar down to size and put the hand in the center, to remove the tail. :wink:

..Though that would probably result in a slight curvature of the 'spine'.

Excellent design.

~Amanda
User avatar
Lamanda2
Merchant
 
Posts: 1218
Joined: Sun Feb 26, 2006 3:05 am
Location: US of A

Postby Scnicker » Tue Jan 22, 2008 9:12 am

Donut wrote:Ingenious! May I ask where can you find the bley rod shaped piece?


You can find if almost in every Viking Set ;)

Really nice work Tanotrooper! Eventhough I wouldn't use this for normal figs, this style might make great Starcraft Marines :).
User avatar
Scnicker
Landlord
 
Posts: 978
Joined: Wed Oct 06, 2004 7:38 pm
Location: Istanbul - Turkey

Postby cagri » Tue Jan 22, 2008 10:34 am

It's a man right? I think the "tail" is on the wrong side.
User avatar
cagri
Peasant
 
Posts: 74
Joined: Sat Sep 29, 2007 8:06 pm
Location: Turkey, Ankara

Postby Tanotrooper » Tue Jan 22, 2008 11:13 am

Lamanda2 wrote:Hmm.. I like it! :)

I'm not really one for brick-built legs on figs, but it would be great for a cyborg/robot figure as Dr. J has suggested.
I think I'll have to 'steal' your design for use in future vigs, it has a lot of potential.

Of course, the customizer in me makes me want to take and cut a lightsaber bar down to size and put the hand in the center, to remove the tail. :wink:

..Though that would probably result in a slight curvature of the 'spine'.

Excellent design.

~Amanda


Thanks for the comments :D

the lightsaber bar won't work with the hand, because of the design of it. I tried it with a hook piece, but that leaves a big gap open between the torso and the "legs"...

TT
User avatar
Tanotrooper
Gentleman
 
Posts: 737
Joined: Fri Aug 12, 2005 1:36 pm
Location: Flanders, Belgium

Postby E of Alshire » Tue Jan 22, 2008 1:35 pm

Have you seen Mike Crowley's BrickFa? It may be another means to your goal.
Image
User avatar
E of Alshire
Merchant
 
Posts: 1289
Joined: Sun Aug 28, 2005 1:10 am
Location: Tulsa, OK

Postby Tanotrooper » Tue Jan 22, 2008 3:54 pm

Sadly in this way there is a very hard burden upon the levers, and they don't need much to bend or snap.

TT
User avatar
Tanotrooper
Gentleman
 
Posts: 737
Joined: Fri Aug 12, 2005 1:36 pm
Location: Flanders, Belgium

Postby Tanotrooper » Wed Feb 06, 2008 9:14 pm

update :D

any Medieval figs will be placed in Castle MOCs.

Here we have a French cuirassier from the Napoleonic Wars:

Image

Image

I could finally make it this year, thanks to the knight impulse set and the rebel attack speeder. It took me long to find the right combination for the legs, but it looks great! :D

Comments and constructive critisism are appreciated.

TT
User avatar
Tanotrooper
Gentleman
 
Posts: 737
Joined: Fri Aug 12, 2005 1:36 pm
Location: Flanders, Belgium

Postby Tanotrooper » Sun Feb 10, 2008 9:09 pm

*update*

an English bobbie:

Image

Image

from the Napoleonic wars, an officer of the British rifles. The officers wore jackets over their left arm, wich is represented here. The British rifles were the elite light infantry and were armed with rifles rather than muskets:

Image

Image

TT
User avatar
Tanotrooper
Gentleman
 
Posts: 737
Joined: Fri Aug 12, 2005 1:36 pm
Location: Flanders, Belgium

Next

Return to General LEGO

Who is online

Users browsing this forum: No registered users and 1 guest

cron