Classic Castle dot Com



Ovoid Shields and Stickers

by Anthony Sava, 1 XII 2003

Too many Ovoid Fright Knight Shields? Finding Harry Potter Gryffindor Shields too hard to come by? Ever feel like the Black Falcons got cheated out of bigger shields? This is the article for you!

Discuss this article!

Ovoid shields are the most recent advent in the LEGO Comapany's line of medieval hand held defensive equipment, and as such there haven't been too many designs created until very recently. While the ovoid shield designs are by no means the only designs they've made, other designs like torso and triangular shield designs will not be discussed in this article.

All the shield images that are found in this article depict or are based off of official LEGO designs, which are copyrighted by LEGO. However, these images were all created by me, and not simple scans. If any LEGO employee or representative wishes to contact me about the legality of these images, please contact me at sava at ikros dot net.

So, you want ovoid shields, eh? Whether you want designs to be used on your website, change your armies' loyalties, or just spruce up a creation, you've come to the right place.


The first thing you'll need before you start creating a ovoid shield design is a template. After all, there's not much sense in creating a sticker if it won't fit on the shield. As for web graphics, making the image the right shape just makes it look more authentic.

The ovoid shield is not true to any nice even numbers. A minifig's ovoid shield is about 1.55 cm wide, and about 2.85 cm tall.

Why is that important? Because it gives us a reference point to use when printing out shield stickers!

So we have a reference point. Now we need a template. To create a template, the easiest way is to get an existing image of a shield and use the silouhette as a guide to create the perfect shape.

However, those of you reading this article don't even have to go that far. Here are two different templates for your use. Just click on the image for the full size.

Download the PSD

Download the Bitmap

Download the PSD

Download the Bitmap

These templates are big, yes. But that is so you can have a really nice, large image to be shrunk down with a high level of detail when printed. It's the same for web graphic work, except you can just shrink it down to whatever size you need.

These templates have been designed to be printed out at 500 dpi. At this resolution, the images will print out at exactly 1.55 cm wide. Pretty nifty, huh?

However, if you don't have a high level graphics program to work with, or a system that won't print out a picture in that way, here's what you will need to know:

In order to print an image at 1.55 cm wide, an image at:

500 dpi needs to be 305 pixels wide
300 dpi needs to be 183 pixels wide
100 dpi needs to be 61 pixels wide

The default of programs vary, so you'll need to figure out what you have if it cannot changed. Photoshop's default seems to be 300 dpi.


Ok, so we have our template. Now we need to fill it with something. It doesn't matter what you fill it with, as long as you like the image.

If you are planning on drawing your own shield image, as opposed to using an existing image from somewhere, you'll want to skip the next few steps.

First, find an image. For the purposes of this demonstration, I'll go with the Dragon Masters Dragon Shield.

Find yourself an image that you can see the entire image straight on, that is, the camera is looking right at the image. This way, you can have a much easier time of editing. I did not use this particular image of the Dragon shield.

Then, blow up the image to fit inside the template, and orient it the way you'd like to see it in the image.

Then begin the process of cleaning up the image, if necessary.

Click on the image for a larger view. Here you can see that I've begun tracing the dragon's head and neck.

Next, add any extras you want to the shield, like ribbons or rounded corners.

Click on the image for a larger view. Here you can see I've finished the shield. I've since changed the shape of the border seen in the in progress picture.


If you were in the market for web graphics, this is where you'd stop. However, if you're looking to spruce up your army, you'll need to print out your design.

First you'll need to make sure you can print out the images at the right size. Print a test image of your shield. Did it come out at the right size? If it didn't, you'll want to either change your printing resolution (this is probably in the printing options of the image program you're using) or change the size of the image itself. Please reffer to the image sizes up in the template section if necessary.

Once you can print out your shield design at the right size, there are only two other things that stand in your way.

First, you are going to need a printer capable of printing color (typically) and printing at high resolutions (300-500+). The higher the resolution your printer can print, the more crisp and detailed your stickers are going to be. Of course, once you've exceeded the resolution of your original image, you're not going to see much difference between printers.

Secondly, you are going to need paper. Not just any paper will do, of course. You're going to need, of course, paper compatible with your printer.

Typically people who create stickers use one of two methods.

The first method is to print out their images on non glossy paper and cover the images with clear tape. This adds a shine to and protects the image, but also stiffens it.

However, if cost is no object to you, then going with a glossy paper is better. Photo paper is perhaps overkill, but only the best for your troops, right?

Of course, adhering your sticker to your shield is another hurdle. You can either glue or adhere your sticker using any sort of glue or tape, or you can use sticker paper. Sticker paper is probably best, and much less messy (and of course costs more).

Most people, when printing out stickers, create a large file of many shields to print out with. This way they get the most shields for their money.


The following designs are found on various LEGO ovoid shields up to the year 2003. Some names of the shields are not necessarily official, but rather names I've given the shields when no name is available.

Click on any image to view the larger version.

"Dragon Masters Blue"
Download the PSD

"Dragon Masters Green"
Download the PSD

"Royal Knights"
Download the PSD

"Fright Knights"
Download the PSD

"Raging Bulls"
Download the PSD

Download the PSD

Download the PSD


The following designs are variations on official LEGO shields designs.

Click on any image to view the larger version.

Variations on a Theme. These shields designs were inspired by official LEGO designs.

Download the PSD

Download the PSD

Download the PSD

Download the PSD

Download the PSD

"Lion Heart"
Download the PSD

"Black & Red"
Download the PSD

"Red & Tan"
Download the PSD

"Crusader Blue"
Download the PSD

"Crusader Yellow"
Download the PSD

"Black Falcon Blue"
Download the PSD

"Black Falcon Yellow"
Download the PSD

"Black Monarch"
Download the PSD

Download the PSD

"Wolf Pack"
Download the PSD

Feel free to use any of these images as you wish. They are free to download and to use for personal, non-commercial use only. However, if the situation arises, please give me my due credit. These shields were a lot of work.

--Anthony Sava
all comments and criticisms can be directed to the author at sava at ikros dot net.

 Home | Archives | City | Events | Sets | How-to | Creations | Stories | Links | Contact 

2003 Site design Anthony Sava and Benjamin Ellermann. All rights reserved. This is an unofficial fan created LEGO website, and is not sponsored, authorized or endorsed by The LEGO Group. Visit the official LEGO website: